Absorption vs. Bioavailability: What’s the Difference?
0 Comments

A proprietary blend is a group of ingredients listed on a supplement label under one combined weight. The label tells you the blend’s total amount and names what is inside, but not how much of each ingredient you get. That is legal in the United States, and it is also why you can’t tell from the label whether a blend contains a meaningful amount of the ingredient you bought it for.

This guide explains what the law requires, why companies use blends, what the trade-off costs you, and how to read a label so you know what you are paying for.

Mycelia Link
Know What’s in Your Supplements
Mycelia Link uses clear labels, no proprietary blends, and published Certificates of Analysis for its supplements.

TL;DR

  • A proprietary blend lists a total weight and the ingredient names, but not the amount of each ingredient.
  • Federal rules require the ingredients in a blend to appear in descending order by weight, so the first one is the largest.
  • The format protects a company’s formula, but it stops you from comparing doses to the amounts used in research.
  • Look for single-ingredient lines, a published Certificate of Analysis (COA) and independent testing, not just a tidy label.
  • We don’t use proprietary blends in our supplements. Every ingredient is on the label, and the COAs are published.

Table of Contents

What a proprietary blend actually is

Open any supplement bottle and find the Supplement Facts panel. Most products list each ingredient on its own line with an amount: 500 mg of this, 100 mg of that. A proprietary blend collapses several of those lines into one. You see a name (often a branded or invented one), a single weight such as 600 mg, and a list of ingredients indented underneath.

A 2023 paper in The Journal of Nutrition describes a proprietary blend as a grouping of dietary ingredients that companies may list to protect unique formulas. The label declares the blend’s weight and the ingredient names, but not the amounts of the individual ingredients.

The same ingredient list might hide very different products. Take a 600 mg blend of five ingredients. It could be five roughly equal parts of 120 mg each. It could also be 580 mg of the cheapest ingredient and a few milligrams of the one printed on the front of the bottle. The label reads the same either way.

What a proprietary blend actually is — overview diagram

What the law requires and what it allows

Proprietary blends are not a loophole someone found. In the United States, the Federal Food, Drug, and Cosmetic Act expressly provides for them, and the Council for Responsible Nutrition (CRN), a trade association, notes that the provision exists to protect formulators’ intellectual property.

The federal labeling regulation, 21 CFR 101.36, says a blend must be identified by the term “Proprietary Blend” or another appropriately descriptive term or fanciful name. That second phrase explains why many blends carry invented names that sound scientific.

Here is what FDA’s compliance guidance says a blend label must do:

  • Identify the blend by a name, which may be descriptive or a fanciful name.
  • State the blend’s total amount.
  • List the dietary ingredients in descending order of predominance by weight.

The NIH Office of Dietary Supplements gives the same summary for consumers: the label must state the total weight of the blend and list its components in order of predominance by weight.

What the rules do not require is the amount of each ingredient inside the blend. The 2023 Journal of Nutrition paper makes this point directly: the total weight and the names must be declared, but individual amounts need not be.

Which ingredients can go in a blend

Not everything can be tucked into a blend. Under the regulation, vitamins and minerals that have a Reference Daily Intake or Daily Reference Value are declared separately, not inside the blend. Other dietary ingredients can go in, and CRN gives curcuminoids, lutein and omega-3 fatty acids as examples of such ingredients.

CRN goes further than the law in its own best practices. It suggests that putting essential vitamins or minerals inside a blend can confuse shoppers, and recommends listing them separately.

Non-dietary ingredients, such as fillers and flavors, are a different matter. They go in the separate Other Ingredients list unless they qualify as processing aids or incidental additives, per the same CRN document.

Why companies use blends

There are two honest reasons and one less comfortable one.

Protecting a formula. A supplement formula is hard to patent. If a company lists exact amounts, a competitor can copy the product the same week. Blends exist to prevent that, and the law recognizes the interest.

Simplicity. Some blends combine many minor ingredients, and a single line is easier to print on a small label.

Hiding a low dose. This is the one shoppers worry about. Because only the total weight and the order are shown, a company can build a long, impressive ingredient list while the expensive ingredients sit at the bottom in tiny amounts. The label stays legal. The Journal of Nutrition authors describe the trade-off plainly: the format protects commercial intellectual property while limiting consumer transparency about doses.

Three reasons companies use proprietary blends

We go into the dosing question in more detail in why supplement companies hide dosages.

What a hidden amount costs you

You can’t compare to research

Studies on supplement ingredients use specific amounts. If a label doesn’t show your amount, you can’t check it against the study. The 2023 paper notes that without individual amounts, consumers and researchers cannot calculate ingredient exposures or work out clinical-trial doses from the label.

This matters most with functional mushrooms. A label that says “mushroom complex” tells you nothing about how much of each species is present, whether the product is a fruiting-body extract or mycelium grown on grain, or how much beta-glucan it contains. Our guides on mushroom extract ratios and the COA checks that matter for mushroom supplements cover these lab values.

You can’t compare prices

Two bottles with the same weight on the label can hold very different amounts of the ingredient you care about. Price per serving tells you little. Price per milligram of the named active ingredient is the useful number, and a blend removes your ability to work it out.

Blend names can sound like claims

Blend names that imply a health benefit can be viewed as structure/function claims, according to the 2023 Journal of Nutrition paper. FDA says a firm making such a claim must have substantiation that it is truthful and not misleading. CRN adds that the substantiation should cover the entire blend, not just its best-studied ingredient.

Are blends always bad?

No. A blend is a labeling format, not a verdict on quality. A company can use a blend and still make a well-made, properly dosed product. Federal rules require dietary supplement makers, blend users included, to follow Good Manufacturing Practices that cover identity, purity, strength and composition, in effect since 2007 regulations.

CRN also stresses that makers should set specifications and verify them whether the blend is made in-house or bought as a premade mixture.

The problem is that you, the buyer, can’t verify any of that from the front of a bottle. The NIH is blunt about this: it is difficult to determine a supplement’s quality from its label alone, because quality control depends on the manufacturer, the supplier and others in production. A blend asks you to trust. A fully disclosed label with test results lets you check.

Also keep in mind that federal law does not require safety and effectiveness testing of dietary supplements before they are sold, so the evidence behind ingredients varies widely. A blend adds one more layer of uncertainty on top of that.

How to read a label with a blend in it

Use this short routine in a store aisle or on a product page.

  1. Find the word “blend” or a branded name with a symbol next to it. Researchers analyzing the Dietary Supplement Label Database coded a product as having a proprietary blend when the name included “proprietary blend” or an intellectual-property symbol. Trademark symbols are a useful cue.
  2. Compare the blend weight to the serving size. If the blend is 300 mg and holds eight ingredients, the average per ingredient is under 40 mg. The headline ingredient can’t exceed the total.
  3. Read the order. The first ingredient is the largest by weight. If your target ingredient comes last, expect the smallest share.
  4. Check for vitamins and minerals inside the blend. These are meant to be declared separately, and CRN’s best practices say they should not sit in a blend.
  5. Look at the rest of the label. Beyond the Supplement Facts panel, a label should carry the product name, net quantity, manufacturer or distributor contact information and directions for use, per the NIH fact sheet. A domestic address or phone number must also be there for reporting serious adverse events.
  6. Ask for independent test results. A COA from a third-party lab shows what was measured in a specific lot. Our third-party supplement testing guide explains what to look for.

For a faster version, see our two-minute checklist for reading supplement labels and verifying COAs.

Red flags worth a second look

  • A long ingredient list with a small total blend weight.
  • A blend name that sounds like a health claim, with no data on the full blend.
  • Vitamins or minerals inside the blend.
  • No lot-specific lab results on the brand’s site, or results that only show a generic ingredient.
  • A brand that can’t or won’t say what amount of an ingredient is in a serving when you email.

If you want a wider framework, our guide on evaluating wellness product transparency claims walks through the same questions for any product category, and our piece on identifying artificial additives covers the Other Ingredients list.

Our perspective on blends

We sell functional mushroom supplements, and we made a plain decision at the start: no proprietary blends. Every ingredient is named on the label, and the lab results behind each lot are published as Certificates of Analysis from third-party testing.

We understand why blends exist. Formulas are valuable, and we don’t think every company that uses one is hiding something. But for a product you take regularly, we think the buyer should be able to see what is in it. When you can read the label and then open the COA to compare, you don’t have to take our word for anything.

There is also an honest limit to what a COA does. It shows what a lab measured in a specific lot. It does not show that a supplement will do anything for you, and we don’t make health promises. What we do is explain what the results show, so you can judge the product on facts. Please follow the directions on the label and check with a healthcare professional before starting a supplement, especially if you take medication or have a medical condition.

— Mycelia Link Industries

Where to find clearly labeled mushroom supplements

If you want a supplement with single-ingredient lines and published lab results, browse our mushroom and wellness supplements. Each product page links to its COA. If you buy regularly, M-Link Pro is our membership, at $29.99 per month or $299 per year, and members get member pricing.

For broader background on how we build our formulas, read our guide to clean supplement formulation and our supplement transparency best practices.

A note on research compounds

Transparency is not only a supplement issue. We also sell research peptides, strictly for laboratory research use and not for human or animal consumption. The same principle applies there: a buyer should see purity testing and a COA for the lot, not just a product name. If you are a researcher sourcing compounds, our guide on how to source research peptides safely covers what to check, and the full range is on our research peptides page.

FAQ

What is true about proprietary blends?

A blend lists a total weight and the ingredient names in descending order by weight, but not each ingredient’s amount. The format is legal under federal law and exists to protect formulas. It is not proof of a poor product, but it does limit how much you can verify from the label.

Are proprietary blends regulated?

Yes. 21 CFR 101.36 sets the labeling rules, and manufacturers must also follow Good Manufacturing Practices. What the rules don’t require is disclosure of individual ingredient amounts inside the blend.

What are red flags on a supplement label?

Watch for a small blend weight with a long ingredient list, vitamins or minerals tucked inside a blend, a blend name that implies a health benefit, and no independent lab results. Missing contact information for reporting adverse events is also a warning sign, since the label is required to carry it.

How can I check a supplement that uses a blend?

Compare the blend weight to the serving size, note the ingredient order, and then contact the company to ask for the amounts and for a lot-specific COA. If a brand won’t answer, that tells you something. Check with a doctor or pharmacist before starting any supplement if you take medication or have a health condition.

Sources

This article is for informational and educational purposes only and is not medical advice. Research peptides sold by Mycelia Link are for laboratory research use only and are not for human or animal consumption. Statements about dietary supplements have not been evaluated by the Food and Drug Administration; these products are not intended to diagnose, treat, cure or prevent any disease.

Categories:

Related Posts

Shopper checking a mushroom supplement label Standardized Extract Meaning: How to Read the Label
What "standardized extract" means on a supplement label, how marker compounds and ratios work, and
Maitake mushrooms cooking in a skillet Maitake Benefits: What the Research Shows and What to Check
Maitake benefits explained: nutrients, beta-glucans, one cognitive trial in older adults, safety, medication cautions and
Woman taking an oral tablet with water Absorption vs. Bioavailability: What’s the Difference?
Absorption is how much crosses the gut wall. Bioavailability is how much active compound reaches
0
🔔 Never miss a dropGet alerts for new supplements, restocks & sales.